Looking for a hard tonneau cover for your 2008-2016 Ford F-250, F-350 and F-450 with an 8' bed? The BAKFlip G2 Hard Folding Tonneau Cover, part number 226311, is cut for that application. It folds forward against the cab for full bed access, then closes and locks to protect what you carry.
The BAKFlip G2 combines aluminum-skinned panels, EPDM perimeter seals and automatic slam latches in a cover that clamps on without drilling.
On a Super Duty the bed is a rolling toolbox, and a hard cover keeps what is in it protected from weather and out of sight.
Light, stiff and made for daily use. Each panel has a solid core wrapped in aircraft-grade aluminum skins, finished in a semi-gloss black powder coat that resists fading, chipping and flaking. Integrated struts hold the folded cover snug against the cab to cut rattle and vibration, and the cover is rated for 300 lb of evenly distributed weight on top.
Built to shed water. Precision-fit EPDM rubber seals run the perimeter, the hinges are rounded, and an integrated drainage system sends water away from the bed, which helps keep rain and wash-down spray outside.
Security without extra steps. Automatic slam latches lock the panels as they close, and the hard aluminum-skinned panels keep cargo out of sight and out of easy reach.
Open it when you need it. Release the cover, fold the panels toward the cab, and the whole bed is available for lumber, bikes, gear or a load of mulch. The cover never has to leave the truck to give you the space.
Assembled in the USA and backed by BAK's three-year limited warranty, the G2 is a straightforward way to put a hard, lockable lid on your truck. Order the BAK 226311 from Track Ready Products, and match the bed length shown above before you check out.
Plan on roughly 30 minutes with basic hand tools. The G2 clamps to the rails, so nothing gets drilled or cut and everything you need comes in the kit.
Wipe down the rails, seat the cover, then snug the clamps a little at a time on both sides so it pulls down square. Test the latch and the open and close action while the bed is still empty.
Recheck the clamps after about a week, wash with mild automotive soap and water, and clear off snow and ice before opening. Keep the cover secured at all points whenever you drive.
