226204 is the BAKFlip G2 Hard Folding Tonneau Cover sized for the 2002-2018 Ram 1500 (plus 2019-2021 Classic) and 2003-2021 Ram 2500/3500 with an 8' bed. The hard panels protect your cargo from weather and prying eyes, and the folding design opens the bed in one move.
The BAKFlip G2 combines aluminum-skinned panels, EPDM perimeter seals and automatic slam latches in a cover that clamps on without drilling.
On a Ram the bed is meant to be used, and a cover that locks, seals and still opens fully helps you use it.
Open it when you need it. Release the cover, fold the panels toward the cab, and the whole bed is available for lumber, bikes, gear or a load of mulch. The cover never has to leave the truck to give you the space.
Strength without the weight. Aircraft-grade aluminum skins over a solid core give the panels their rigidity, and the semi-gloss black powder coat stands up to fading and chipping. The low-profile fit looks clean on the truck, built-in struts keep the folded cover from rattling against the cab, and the load rating is 300 lb evenly distributed.
Security without extra steps. Automatic slam latches lock the panels as they close, and the hard aluminum-skinned panels keep cargo out of sight and out of easy reach.
A sealed perimeter with somewhere for water to go. The EPDM seals hug the bed rails, and the drainage system gives rain and runoff a path that does not run through your cargo area.
Fit notes: It is not compatible with the RamBox bed storage system. Also match the bed length shown in the fitment line above.
If you want a hard cover that locks, seals and folds out of the way without a complicated install, the BAK 226204 is built for exactly that. It is assembled in the USA, carries a three-year limited warranty, and ships from Track Ready Products.
No drilling and no cutting. The cover clamps to the bed rails and the kit and hardware ship in the box, so with basic hand tools most installs take about 30 minutes or less.
Clean the bed rail caps first so the seals sit on a clean surface, set the cover in place, and tighten the clamps evenly from side to side. Work the cover open and closed once before you load the bed.
Care is simple: mild automotive soap and water for cleaning, a clamp check after about a week and periodically afterward, the cover secured whenever the truck is moving, and snow and ice cleared before you open it.
