Free Shipping on Orders Over $99  ·  No Code Needed

aFe MACH Force-Xp 304 Stainless Steel Clamp-on Exhaust Tip Polished 3in Inletx4-1/2in Outletx12in L

*Photo may not represent actual product

The aFe MACH Force-Xp 304 Stainless Steel Clamp-on Exhaust Tip in polished finish is a 12-inch tailpipe finisher that steps a 3-inch inlet down to a 4-1/2-inch outlet. It is constructed from 304 stainless steel and has a mirror polished finish for corrosion resistance. That alloy and finish are the main reasons to choose it over a plated or mild-steel tip, since the polish holds up better to road salt and washing. A laser-cut aFe POWER logo plate is riveted on for an aggressive style.

The clamp is part of the value. A high quality stainless steel clamp is used for a complete 360 degree sealing surface. A tip that seals fully around the pipe avoids the rattle and exhaust leak that cheaper, loosely fitting tips can produce, and the band clamp is what holds the tip in place over years of heat cycles. This is a universal clamp-on design rather than a vehicle-specific part, so the buyer should confirm the tailpipe is about 3 inches in outside diameter. The manufacturer describes its universal tips as adjustable and easy to install. Searches for a 3 inch polished stainless exhaust tip with 4.5 inch outlet, or a 304 stainless clamp-on tip for a 3 inch tailpipe, match this part.

  • Manufacturer Part Number: 49T30452-P12
  • Inlet Diameter: 3 in
  • Outlet Diameter: 4-1/2 in
  • Overall Length: 12 in
  • Material: 304 stainless steel
  • Finish: Mirror polished
  • Mounting: Clamp-on with stainless band clamp, slotted for secure mounting
  • Fitment: Universal, for 3 in exhaust tubing
  • Badging: Laser-cut aFe POWER logo plate, riveted

FAQ:

Will this tip fit my car without modifications?

The manufacturer lists this as a universal clamp-on tip sized for 3-inch exhaust tubing, not a vehicle-specific part. Measure your tailpipe's outside diameter before ordering, and confirm fit with the manufacturer if your tailpipe is not 3 inches.

Does this tip require welding or cutting?

The manufacturer's page for its 3-inch universal Force-Xp tip, a 9-inch version, says it requires no modifications or welding. The 12-inch version's install requirements have not been separately confirmed, so check with the manufacturer before installing.

Are the stock-style clamps reliable?

Owners on user forums have reported that clamps on a different aFe 5-inch exhaust system did not crush enough to hold well, and at least one owner added self-tapping stainless screws through the clamp to keep the joint secure. Inspect the clamp after installation and retighten it as needed.

Installing it yourself

Installation is a clamp-on job: slide the tip over the tailpipe, position the logo where you want it, and tighten the band clamp. The manufacturer's install guides for aFe exhaust systems call for letting the exhaust cool before working on it, wearing eye and hand protection, and re-tightening all exhaust clamps after the first 50 to 100 miles. The same guides recommend keeping the tailpipe at least 1/2 to 1 inch away from body panels to prevent heat damage. Because the clamp is the only fastening point, test the tip's alignment and tightness after a short drive and a heat cycle, and add a stainless screw through the clamp if it does not hold firmly.

  • MPN: 49T30452-P12
  • Manufactured by: aFe
  • Units per SKU: 1
Exclusive member pricing Free membership — sign in to see your price
Join Free →

$79.00

MSRP / List price
Member Price
Your price after signing in
$79.00
Add to Cart:
MPN
49T30452-P12
Manufacturer
aFe
Availability
Out of Stock
Ships Within
1–2 Business Days
Member Pricing
Easy Returns
Expert Support
Secure Checkout