Free Shipping on Orders Over $99  ·  No Code Needed

Eibach 90-95 Toyota 4Runner Pro-Lift-Kit Hd Springs (Rear Springs Only)

*Photo may not represent actual product

The Eibach 90-95 Toyota 4Runner Pro-Lift-Kit HD Rear Springs (MPN E30-82-004-02-02) are heavy-duty rear coil springs sold as a pair for 1990-1995 4Runner Base models. The manufacturer says they were developed with the same championship-winning off-road race technology behind its PRO-LIFT line. They are engineered for a rear lift with an added 200 to 400 lb of rear weight, so they suit a 2nd-gen 4Runner that carries gear, passengers, or a load. Owners on user forums regularly describe the factory rear end sagging on these trucks, and a heavy-duty rear spring addresses that stance without changing the front suspension.

Stacking spacers on stock coils is the common budget fix, but owners on user forums warn that extra height can top out the rear shocks, which makes a matched setup worth the money. The manufacturer requires these springs to be paired with Eibach Pro-Truck Sport Rear Shocks, so the damping and spring rate are designed to work together. Made in the USA and built for heavier rear loads, these springs give a 2nd-gen 4Runner owner a purpose-built rear suspension rather than a stopgap.

  • Vehicle application: 1990-1995 Toyota 4Runner (Base)
  • Position: Rear springs only (pair of 2)
  • Intended rear load: Additional 200-400 lb of rear weight
  • Required rear shocks: Eibach Pro-Truck Sport Rear Shocks
  • Manufacturer part number: E30-82-004-02-02
  • Country of manufacture: USA

FAQ:

Will these springs raise the front of my 4Runner?

No. The manufacturer lists this part as rear springs only, so front height is not addressed by this purchase.

Can I run these with my factory rear shocks?

The manufacturer specifies that these springs must be used with Eibach Pro-Truck Sport Rear Shocks.

Are these springs meant for an unloaded 4Runner?

The manufacturer states they are intended for vehicles carrying an additional 200 to 400 lb in the rear, so an empty truck is not the target application.

Installing it yourself

Eibach's install sheets for other PRO-LIFT applications call for safety stands and blocked wheels, a hoist or screw jack to speed the job, and no impact tools on shock piston rod nuts. They also say to keep the stock spring isolators and dampers, to install each spring with the Eibach logo facing up, and to check alignment, fender and brake line clearance, and ABS sensor position afterward, then recheck torque after about 10 miles. Owner write-ups for 2nd-gen rear spring swaps describe supporting the frame so the axle can drop, leaving the shocks on the upper mount, and making sure the rubber isolators stay in place. Confirm the procedure against the manufacturer's install sheet for this exact part number before you start.

  • MPN: E30-82-004-02-02
  • Manufactured by: Eibach
  • Units per SKU: 1
  • On Order: 1
Exclusive member pricing Free membership — sign in to see your price
Join Free →

$275.00

MSRP / List price
Member Price
Your price after signing in
$275.00
Add to Cart:
MPN
E30-82-004-02-02
Manufacturer
Eibach
Availability
Out of Stock
Ships Within
1–2 Business Days
Member Pricing
Easy Returns
Expert Support
Secure Checkout