The Bilstein 47-359857 is a B8 6112 front suspension kit built for 2023-and-newer Chevrolet Colorado Trail Boss and GMC Canyon trucks. It replaces the factory front struts with a monotube-style shock and coil spring assembly. The spring seat sits in one of several circlip grooves, so you choose a front ride height instead of accepting one fixed lift. Owners on user forums describe the 6112 platform as a clear ride-quality step up from stock and from budget leveling struts, particularly on rough pavement and trail use.
Owners on user forums also say the damping holds up for towing and off-road work, though the firmer feel is a trade-off on daily driving. Because the height is set by circlip position rather than a spacer stack, the kit keeps the strut and spring working as one unit. Published front lift figures for this platform vary, so confirm the expected height for your truck with the manufacturer before ordering. Search terms this kit matches include 2023 Colorado Trail Boss front lift struts, GMC Canyon Bilstein 6112 coilover, and Trail Boss adjustable front shocks.
Owners on user forums who ran the 6112 on Colorado trucks report that the top advertised figure was not reached without additional strut spacers, and that measured lift varied side to side. Confirm the circlip setting and expected height with the manufacturer for this specific part number.
Trail Boss owners on user forums report that a Bilstein technician recommended upper control arms when the added lift exceeds roughly half an inch. Check with the manufacturer for guidance on this kit and your intended tire size.
This is a spring-compression job, so a proper spring compressor is required. Owners on user forums who installed the 6112 on Trail Boss trucks report that the stock lower strut bolt nut does not fit the Bilstein studs, and that a standard grade 8 nut works in its place. Another common mistake noted by owners is leaving off the lower top hat washer, which can let the shock shaft push through the upper rubber bushing. Set the circlip position before assembly, confirm the seat orientation against the manufacturer's instructions, and align the upper mount carefully when reinstalling. Plan on a wheel alignment after the install.