The Bilstein 5100 Series steering damper, part number 24-164870, is a front-position, 46mm monotube unit for four-wheel-drive Dodge Ram 2500 trucks, including the 2006 Laramie named in the product title. Monotube designs are generally built to react quickly to steering inputs, so this unit targets the wobble and vibration that a worn or soft factory stabilizer lets through. If your truck shakes through the wheel on rough pavement or runs larger tires, a firmer aftermarket damper is a common upgrade. One owner on a user forum who fitted an aftermarket damper on a Ram reported that the factory unit had almost no rebound and that bump steer dropped noticeably after the swap.
Fitment deserves the closest look before checkout. Listings for this exact number disagree on mount style: most describe a cantilever-to-eye end for the early 2003 to 2007 steering setup, while at least one describes a Y-style stem-to-eye linkage. Details vary, so confirm the mounting style with the manufacturer and compare the end fittings on your truck's existing stabilizer before ordering. Shoppers searching for a 2006 Ram 2500 4WD steering stabilizer, a 46mm monotube steering damper, or a Ram death wobble fix should verify the fit first, because a mismatched end will not seat on the factory bracket. Plan on a torque wrench, deep sockets and penetrating lubricant for the swap, and inspect the stock hardware while the old unit is off.
Most listings for this part number describe a cantilever-to-eye mount meant for the early 2003 to 2007 steering setup, but at least one describes a Y-style stem-to-eye linkage. Details vary, so confirm the mount style with the manufacturer and compare it against the stabilizer currently on your truck.
The product name calls for the 2006 Ram 2500 Laramie in 4WD form. Because mount style varies across sources, check the mounting end on your existing stabilizer against the replacement and confirm the application with the manufacturer before purchase.
