Free Shipping on Orders Over $99  ·  No Code Needed

Koni 2100 FSD (Gold) 02-07 Saab 9-5 (incl. V6) Front Damper

*Photo may not represent actual product

The KONI 2100 FSD (Gold) front damper is a replacement for the original front damper on the 2002–2007 Saab 9-5, including V6 models. It uses KONI's patented Frequency Selective Damping (FSD) design, which the manufacturer describes as a passive mechanical valve system. A secondary valve controls a parallel oil path, so damping builds with sustained body motion such as cornering and braking, while short, sharp road bumps are absorbed more softly. Because the valving reacts to motion without electronics or sensors, it offers a middle ground between a comfort-tuned and a firm sport damper.

Owners on user forums are divided on the ride. Some report that the car corners flatter and feels more stable at motorway speeds than with the worn originals. Others find the FSD softer than they want, and prefer firmer aftermarket dampers, particularly on wagons. Buy these if you want a smoother, adaptive ride and a gold-finished KONI unit for a 9-5 that otherwise drives on stock springs, rather than a track-focused damper.

  • Position: Front (single damper)
  • Application: 2002–2007 Saab 9-5, including V6 models (confirm exact years against your VIN)
  • Damping technology: KONI Frequency Selective Damping (FSD), passive mechanical valving
  • Finish: Gold
  • Manufacturer part number: 8745 1159

FAQ:

Does this fit every 2002–2007 Saab 9-5, including the V6?

The product is identified as fitting 2002–2007 Saab 9-5 models including V6 versions. Online fitment tables show wider year ranges, so check your VIN and confirm with the manufacturer before ordering.

Do I need to replace the springs too?

Owners on user forums report fitting these with the original springs and reaching a usable ride. The manufacturer should be asked whether the FSD is intended as a damper-only replacement for the factory springs.

Do the front units require cutting the strut housing?

User forums disagree. Some owners describe the front as an insert that requires cutting and re-drilling the original strut housing, while others describe a complete strut that needs no cutting. The answer appears to depend on model year, so confirm the correct configuration with the manufacturer.

Installing it yourself

This is an intermediate-to-advanced job. Owners on user forums recommend a spring compressor, a pipe wrench or two-pin spanner for the insert nut, a pipe cutter if the housing needs trimming, and a drill for the retaining hole. Owners report about three to five hours per front, and a wheel alignment is advisable afterward. Check the included instructions before you start, and expect to spend extra time if your car has a different configuration than your forum reference.

  • MPN: 8745 1159
  • Manufactured by: KONI
  • Units per SKU: 1
  • In Stock: 3
Exclusive member pricing Free membership — sign in to see your price
Join Free →

$177.29

MSRP / List price
Member Price
Your price after signing in
$177.29
Only 3 left in stock — order soon
Add to Cart:
MPN
8745 1159
Manufacturer
KONI
Availability
Only 3 left
Ships Same Day
Order before 5pm PST and this product ships same day
Member Pricing
Easy Returns
Expert Support
Secure Checkout