This FOX reservoir shock kit (part 885-24-271) is a rear-axle replacement for the 2024-and-later INEOS Grenadier. The manufacturer's installation guide lists 885-24-271 as the rear kit, with two left and right rear shocks. Because the shocks are designed to fit your vehicle's shock mounts without modification, you keep factory geometry and avoid drilling or custom brackets. Compared with a generic rear shock, that bolt-on design is the main reason to choose this kit, and the reservoir layout suits buyers who want damping that holds up on long, rough-road runs.
Fitment is straightforward, but the manufacturer notes that reservoir placement can differ by model and application, so check how the reservoir sits before tightening anything. Owners on user forums report the rear top bolts can be reached behind the fender liner by pulling it out of the way, and some trimming of the liner came up on several installs. Searchers typically look for terms like 2024 Grenadier rear reservoir shock, 885-24-271 install, and Grenadier rear bolt-on shock upgrade, and this kit matches those needs.
Yes. The manufacturer's installation guide lists two rear left and right shocks under the rear kit part number.
The manufacturer advises against installing any FOX product without the necessary special tools, expertise, and a chassis lift.
Published lift ranges vary between sources, so confirm the rated rear lift range with the manufacturer before ordering.
Plan on a chassis lift and the special tools the manufacturer calls for, and treat this as a job for an experienced DIYer. The OEM shock is held in place with just two bolts, and 15/16 or 24mm sockets fit the hardware. One owner on a user forum estimated about three hours on the ground with hand tools, and the same owner reported that trimming the fender liners was the most fiddly part. Another forum member mentioned grinding a little metal off a steel shock mount to get the new shock to seat, so inspect the mounts before you start and plan for minor clearance work.
