Free Shipping on Orders Over $99  ·  No Code Needed

Bilstein B8 5100 46mm Shock Absorber 05-15 Toyota Tacoma/03-09 4Runner

*Photo may not represent actual product

The Bilstein B8 5100 24-324359 is a front ride-height-adjustable shock for second-generation Toyota Tacoma 4WD and 4th-generation 4Runner, plus the Lexus GX470 and FJ Cruiser. The manufacturer describes it as a shock for trucks and SUVs with a front coilover-style suspension. It uses a 46mm monotube body with a digressive piston and a snap-ring grooved body that lets you pick the spring seat position for a lift or level setup while keeping OE coil springs. This is a 2005-2015 Tacoma and 2003-2009 4Runner front shock upgrade, aimed at owners who want a monotube damper instead of a stock unit. The B8 5100 is worth the premium over a bare budget shock because its valving is self-adjusting, with a deflective disc setup rather than a unit you must tune by hand. The manufacturer also backs it with a limited lifetime warranty and a zinc-plated finish for corrosion resistance. Because the lift range depends on the application, confirm the exact figure for your truck before ordering. Installation is a front coilover-style swap, so plan the spring seat height before you bolt the unit in.

  • Position: Front
  • Series: B8 5100 (Ride Height Adjustable)
  • Fitment (per manufacturer): 2003-2009 Toyota 4Runner, 2005-2015 Toyota Tacoma (4WD), 2003-2009 Lexus GX470, 2007-2009 Toyota FJ Cruiser
  • Internal design: Monotube
  • Piston diameter: 46mm digressive piston
  • Body design: Snap-ring grooved coilover body
  • Body diameter: 2.0 in.
  • Collapsed length: 17.03 in.
  • Extended length: 22.59 in.
  • Stroke: 5.56 in.
  • Lower mount: 14.2mm eye
  • Upper mount: Stem
  • Finish: Zinc plated
  • Boot: Black straight
  • Warranty: Limited lifetime

FAQ:

Is this a front or rear shock?

The manufacturer lists this part for the front position only, as a coilover-style unit for the front suspension. Rear shocks are not covered by this part number.

How much lift does the B8 5100 provide?

The manufacturer's description cites front lift of up to about 3 inches with OE springs, depending on application. Published figures vary slightly by application, so confirm the exact range with the manufacturer before ordering.

What warranty comes with it?

The manufacturer lists a limited lifetime warranty on the B8 5100 shock.

Installing it yourself

This is a front coilover-style swap, so the job centers on removing the factory shock and fitting the Bilstein in its place. The manufacturer notes that the snap-ring grooves in the body allow different spring seat positions, so set the seat height on the bench before installation to match your target ride height. Confirm the 14.2mm eye lower mount and stem upper mount against the shock you are removing. Torque specs and the specific tool list were not confirmed in my research, so use the manufacturer's install instructions and a service manual before you start.

  • MPN: 24-324359
  • Manufactured by: Bilstein
  • Units per SKU: 1
  • In Stock: 435, On Order: 258
Exclusive member pricing Free membership — sign in to see your price
Join Free →

$176.00

MSRP / List price
Member Price
Your price after signing in
$176.00
In Stock — ships same day if ordered before 5pm PST
Add to Cart:
MPN
24-324359
Manufacturer
Bilstein
Availability
In Stock (435)
Ships Same Day
Order before 5pm PST and this product ships same day
Member Pricing
Easy Returns
Expert Support
Secure Checkout

Customers who bought this product also purchased...