The Bilstein 24-337007 is a front B8 5100 (Ride Height Adjustable) monotube shock for 2015–2020 Chevrolet Suburban and GMC Yukon XL trucks. The manufacturer describes the B8 5100 ride-height line as shocks with multiple snap-ring grooves that reposition the spring seat, so the front end can be leveled or raised without replacing the coil springs. That adjustable seat is the main reason to choose this over a standard replacement shock, which leaves the truck at its factory height, or over coil spacers stacked on the spring.
Setting lift on the bench rather than with spacers keeps the factory spring and upper mount in service, which suits buyers searching for a 2015 Suburban leveling shock, a Yukon XL front lift without new springs, or a B8 5100 ride height adjustable upgrade. Because the manufacturer states that available lift depends on the specific vehicle application, confirm the groove and expected height for your truck before ordering, and pair the shock with a current alignment check after any height change.
The manufacturer states that the B8 5100 ride-height design uses multiple snap-ring grooves in the shock body to move the spring seat. The groove you select determines the height, and the achievable range depends on the vehicle application.
Yes. The manufacturer lists the B8 5100 ride-height-adjustable shocks as monotube designs.
This is a front-end replacement that involves the coil spring and spring seat, so the work goes beyond a simple bolt-on swap. Because the spring seat position is changed by moving the snap ring to a different groove, the manufacturer's install instructions should be followed for the groove that matches your target height. Confirm the required tools, torque values, and any spring-compressor or alignment steps against the manufacturer's install sheet before starting.