The Bilstein B12 Pro-Kit for the E38 7 Series is a matched package: a set of Bilstein performance dampers combined with Eibach Pro-Kit springs, designed as one fixed-height lowering solution. Bilstein says the springs carry a progressive rate, and for the 740iL it specifies about 30 mm of front lowering and 25 mm at the rear. A budget spring-only drop can sit lower but leaves worn stock dampers in place, so this kit is the better choice if you want the handling and ride control of new dampers tuned to the new springs. Owners on user forums of this generation describe a firmer but less bouncy ride, and the "2001" in the product name is only the end of the covered range, since the application list runs from 1995 through 2001. Keywords: E38 740iL lowering kit, BMW 7 Series Eibach Pro-Kit shocks, M60 4.0 and M62 4.4 B12 coilover alternative.
Fitment is the first thing to check. The manufacturer's application data lists the kit for vehicles without electronic (EDC) or self-leveling suspension, so confirm your car's suspension type before ordering. Because the B12 replaces the dampers and springs together, the install is a full front and rear strut-and-spring swap rather than a simple spring drop, which makes it a practical weekend project for a mechanically confident DIYer with the right tools.
The manufacturer lists this kit for vehicles without electronic or self-leveling suspension, so it is not intended for cars equipped with those systems.
No. The manufacturer describes the B12 as a fixed-height lowering solution, with the springs and dampers tuned to each application.
Expect a complete strut-and-spring swap at both axles, which calls for spring compressors, a torque wrench, and basic suspension tools. Owners on user forums working on other BMW platforms report that a proper spring compressor is essential, that strut mounts, bearings, and bump stops are commonly refreshed during the same job, and that the ball joint or control arm may need extra care when separating it. Plan on a wheel alignment after installation, because the ride height change affects alignment settings.