The Mishimoto XL Weighted Shift Knob in black with a knurled grip is a solid steel shift knob built to add mass to the shifter. The manufacturer lists the knob at 32 oz (907 g), 4.33 inches tall, and 1.63 inches in diameter. According to the manufacturer, the extra mass supports more positive gear engagement and smoother shifts, and the knurling keeps a firm grip when hands are wet or under stress. It is a practical step up from a lighter knob for track days or spirited back-road driving, and it carries the manufacturer's Lifetime Warranty. Search terms it matches include XL weighted shift knob, heavy steel shift knob for manual transmission, and knurled M12x1.25 shifter knob.
Fitment depends on your shifter rod thread. The knob ships with three threaded inserts sized for M8x1.25, M10x1.5, and M12x1.25 shifters, so confirm your rod's thread pitch before ordering. The manufacturer also sells a separate XL adapter pack that adds an M10x1.25 insert. Shifters with a reverse-lockout collar, such as many Subaru setups, need the manufacturer's separate reverse lockout adapter to clear the lockout mechanism.
The manufacturer includes three inserts for M8x1.25, M10x1.5, and M12x1.25 shifter rods. If your shifter uses M10x1.25, the manufacturer's separate XL adapter pack includes that size, so check your shifter rod's thread pitch before ordering.
The manufacturer says its reverse lockout adapter is designed for M12x1.25 shifters with reverse lockout collars, and that it allows any Mishimoto or other aftermarket knob to be installed on those vehicles. Check your shifter before installing the knob directly.
The manufacturer states that the added weight helps provide more positive gear engagement and smoother shifts. Feel will vary by driver and vehicle, so the weight is a stated benefit rather than a guaranteed change in shift effort.
The manufacturer rates this install as easy, with two parts in the box (the knob and three threaded adapters) and a stated install time of under five minutes. The adapter threads into the base of the knob, and the assembly then threads onto the shifter rod. The manufacturer's adapter listing notes no tools are required for that step. Before you start, confirm the adapter size matches your shifter rod so the threads engage fully without cross-threading. If your shifter has a reverse-lockout collar, install the manufacturer's separate reverse lockout adapter first, because the standard knob will not clear the lockout mechanism.