The OMP HTE Series Evo Carbon Seat is a fixed-back racing bucket built around a carbon-fiber shell. The manufacturer says its profile is inspired by the HTE ONE, the design behind several world championships, and lists FIA 8855-1999 homologation with W-type side fixings. Its black finish suits competition builds that need a certified seat rather than a street bucket.
Compared with a generic bucket, the appeal is structural: a carbon shell aims to keep the seat rigid while cutting mass, and the manufacturer highlights large shoulder harness slots for a range of driver heights. Velour facing with Airnet inserts addresses heat buildup on long stints, which matters for endurance drivers sharing a seat. Searches for FIA 8855-1999 carbon racing seat, HTE Evo side mount bucket, and HA0-0817-A01-071 install tend to come from buyers who want exactly this combination of certification and weight savings.
No. The manufacturer lists this carbon seat under FIA 8855-1999. The HTE EVO 2 Carbon is a separate part (HA0-0902-A01) homologated to FIA 8855-2021, and the manufacturer notes that its mandatory HC0-0951-A01 brackets must be used.
The manufacturer's seat documentation states that FIA regulations require the seat to be fixed to the brackets with at least four M8 class 8.8 bolts.
Installation is a moderate-difficulty job for a competent DIYer, since the seat mounts to side brackets rather than to factory rails. Use four M8 class 8.8 bolts at minimum, and confirm the bracket part for this 8855-1999 seat with the manufacturer before ordering, because the HC0-0951-A01 mount is documented for the EVO 2 version. Torque fasteners to specification and recheck them after the first track session.