Mishimoto's black silicone hose kit replaces the factory rubber coolant hoses on the 2007-2009 Nissan 350Z, and the manufacturer's bundle page identifies the engine as the VQ35HR. The manufacturer says these radiator hose kits combine high grade silicone with heat-resistant embedded fibers for efficient heat reduction and increased pressure tolerance. Construction descriptions vary across manufacturer pages, with one describing 4-ply silicone, so confirm the exact build with the manufacturer if that detail matters to you. Rated to a max temperature of 330 F, the kit offers a clear margin over rubber for a hard-driven V6 cooling system, and it carries a Mishimoto Lifetime Warranty.
If you are searching for a 350Z VQ35HR silicone radiator hose kit, a 07-09 350Z coolant hose upgrade, or black silicone hoses for a Z33 engine bay, this kit is built to replace the stock hoses in place. The manufacturer describes it as an OEM replacement fit for the 2007-2009 model years, so you do not need to modify the cooling system to install it. Buyers who want a color other than black can select blue or red from the same family.
The manufacturer lists this kit as a direct fit for 2007-2009 Nissan 350Z models, and its bundle page identifies the VQ35HR engine code for that range.
The manufacturer offers this kit in black, blue, or red. The black version is part number MMHOSE-Z33-HRBK.
The manufacturer states that the kit is covered by the Mishimoto Lifetime Warranty.
The manufacturer rates installation as Easy, which makes this a reasonable weekend project for a home mechanic. Work only on a cold engine, because owners on user forums warn that coolant can be very hot and is under pressure, so let the car sit for hours before you open the system. Owners on user forums also recommend lubricating the hose ends with petroleum jelly so the new hoses slide on more easily. One owner reported that the reservoir return line ran longer than needed and had to be trimmed, and that a clamp did not wrap fully around the thicker silicone hose. Test-fit each hose and clamp before final tightening, and check the length of the return line.