This one-piece suit is RaceQuip's blue single-layer driving suit from its 110 series, made from Pyrovatex FRC material and rated SFI 3.2A/1 for competition use. The blue body is trimmed with black accents: high-back collar, leg and arm cuffs, epaulets and beltline. Because the shell is cotton-based, it retains the softness and breathability of cotton and will wick away moisture from the skin.
What separates this suit from a cheaper single-layer option is mostly construction. Seams are assembled with heavy duty, multi-needle, over lock safety stitch machines, and the front closure is a Nomex backed brass zipper installed with a double overlap. A pleated back panel for flexability helps with movement at the wheel. The fire-retardant finish is bonded into the fibers, and with proper care the suit will retain its flame retardant properties beyond the useful life of the garment. Search terms this suit matches: SFI 3.2A/1 one-piece driving suit 2XL, single-layer Pyrovatex race suit, SFI-1 fire suit for grassroots drag and track days.
Manufacturer materials differ slightly. One says RaceQuip suits generally run true to size, but it's best to measure your chest, waist, inseam, and height against their size chart. Another states that RaceQuip suits are cut generous, if between sizes go with the smaller suit. Measure before ordering and confirm with the manufacturer.
The manufacturer advises that most suits should be hand washed or machine washed on gentle with mild detergent, then air dried. Avoid bleach and fabric softener, and do not dry clean, since dry cleaning can damage the fire-resistant properties.