This is a one-piece, black SFI 3.2A/5 driving suit in 2XL from RaceQuip's 120 series, a multi-layer line built for competitive auto racing. The shell is a durable Pyrovatex FRC cotton blend, backed by a Nomex middle layer and lined with another Pyrovatex layer, so the garment uses three fire-resistant plies rather than one. Where a single-layer suit only gives you the basic SFI 3.2A/1 spec, this build is the one to choose for SFI 3.2A/5 tech-inspection compliance. The manufacturer rates it at a TPP rating of 25. Heavy-duty overlock seams and a two-way YKK zipper built on FR tape, with a double overlap at the front, add durability where a cheaper suit usually fails. The manufacturer also says the Pyrovatex treatment bonds to the cotton fibers, so with proper care the garment will retain its flame retardant properties beyond the useful life of the garment. Owners searching for a 2XL SFI-5 fire suit, a Pyrovatex/Nomex race suit, or a 120007 replacement will find the same construction across the 120 line.
Fit is the step that matters most before you buy. The manufacturer's sizing note says RaceQuip racing suits sizes are cut generous. If you find yourself in-between sizes on the sizing chart shown, go with the smaller suit. Its 2XL chart lists a chest of 50 to 52 inches, a waist of 44 to 46 inches, a 32-inch inseam, and a 6'2" to 6'4" height range. Comfort features include a pleated back panel for freedom of movement, boot cuffs, deep bag pockets and the adjustable euro-style belt. There is no installation involved. The DIY step is measuring: measure around the widest part of the chest, under the armpits, keeping the tape horizontal. Then match those numbers to the chart above.
The manufacturer does not size these suits like street clothes. Its sizing guidance says the suits are cut generously, so if your measurements fall between two sizes, the smaller suit is the recommended choice. Use the manufacturer's 2XL chart, which lists a chest of 50 to 52 inches and a waist of 44 to 46 inches, as your starting point.
Per the manufacturer, the Pyrovatex treatment is bonded to the cotton fibers at the molecular level. With proper care, the suit keeps its flame-retardant properties beyond the useful life of the garment. Follow the manufacturer's care instructions to keep it that way.