Part 111003 is the Medium black version of RaceQuip's 110 Series single-layer driving jacket, a lighter option than a multi-layer suit for drivers who need certified upper-body fire protection. The shell is made from non-irritating Pyrovatex fabric, which keeps cotton's softness and breathability while moving moisture away from the skin. Certification is what separates it from an uncertified cotton jacket. The manufacturer rates it at a TPP of 11 and SFI 3.2A/1, and the tags are affixed for technical inspection at sanctioned events. Buyers searching for an SFI 3.2A/1 single layer driving jacket, a Pyrovatex FRC racing jacket, or a TPP 11 fire suit jacket for drag racing, road course, or oval use will find those specs here.
Construction is where the price pays off over time. Multi-needle, overlock safety stitching gives the seams extra strength, and a heavy-duty two-way YKK zipper with a double overlap covers the front opening. The pleated back panel and deep bag pockets keep the jacket comfortable through a long session behind the wheel. Black epaulets, a high-back collar, cuffs, and contrasting arm stripes give it the same look as the matching 110 Series pants. Because this is a universal, non-vehicle-specific garment, there is no installation step. Confirm your chest, sleeve, and neck measurements against the manufacturer's size chart before ordering, and leave the jacket clean and dry, since grease and fuel can compromise the protection.
Yes. The manufacturer lists it as SFI 3.2A/1 rated with a TPP rating of 11, and the SFI tag is affixed to the garment. Check your sanctioning body's current rules before you race, because they may have their own requirements for jackets versus full suits.
The manufacturer states that the Pyrovatex treatment is absorbed into the cotton fibers, so with proper care the garment keeps its flame-retardant properties well beyond its useful life. Follow the care label, keep the jacket free of grease and fuel, and avoid anything that could degrade the fabric.