Mishimoto's kit places one compact, two-port baffled can on the crankcase vent path of the 2016-and-later ND generation Miata. The billet 6061 aluminum housing holds a 50-micron bronze filter and an internal air diverter that slows vapor so oil can drop out before it reaches the intake. Mishimoto ties the design to reducing carbon on the intake valves, and owners on user forums agree the stock system cuts oil vapor without eliminating it. That makes this kit a sensible upgrade for boosted, track-driven, or high-mileage ND Miatas, where the extra separation justifies the cost over a cheap open-element can. The sealed, fully serviceable can also means the filter can be cleaned and reused instead of replaced.
This ND Miata oil catch can kit is direct-fit for 2016+ MX-5 Miata chassis, and the box includes the can, an application-specific bracket, two pre-molded silicone hoses, a drain hose, barbed fittings, a petcock drain valve, and six worm-gear clamps. The manufacturer rates the job as easy, and it ships with an install guide PDF. Owners on user forums say the tightest spot is starting the hose on the factory oil separator, so plan extra time for that connection. Searchers looking for a 2016+ Miata PCV catch can, ND baffled oil separator, or Miata breather catch can with drain valve will find this kit covers those needs.
The manufacturer states the can will not interfere with stock or aftermarket strut tower bars.
Details vary across the manufacturer's own materials. One version of its product page says the can will not fit RHD vehicles, while a later install video and feature list say it fits RHD and LHD. Confirm RHD compatibility with the manufacturer before ordering.
The manufacturer recommends checking the contents every 500 miles after installation until you establish a baseline for your driving.
The manufacturer lists this kit as an easy installation, and the manufacturer's install guide is available as a PDF. Owners on user forums report installing it with the intake manifold still in place, though removing the manifold gives much more room to route hoses. Lifting the car safely on jack stands helps if you reach the lower connection from underneath, and removing the driver's side front wheel makes the drain tube easier to route. On Club trims, owners say the strut tower brace may need to come off to reach the strut nuts for the bracket. Owners also suggest lubricating the inside of the hose ends with a little motor oil before fitting. Never return drained catch can oil to the engine oil, since it carries the contaminants the can has trapped.