The Mishimoto Baffled Oil Catch Can Kit is a dual-can PCV and CCV separator built for the LTG 2.0-liter turbocharged four-cylinder in the sixth-generation Chevrolet Camaro. The manufacturer describes a direct fit with no modification required. Two billet 6061 aluminum cans, each with a 50-micron bronze filter and Viton O-rings, sit in line with both crankcase vent paths so oil is separated from blow-by before vapor reaches the intake tract, charge pipes, and turbo compressor. Because the cans are not heated, vapor condenses inside them rather than returning to the intake.
Stock routing leaves blow-by free to return to the intake, and a single inline can addresses only one of the two vent paths. This kit covers both, and the filter and can remain fully serviceable, so the cost is in the hardware rather than in replacement cans. The manufacturer also backs the kit with a Lifetime Warranty. Searches for LTG oil catch can, 2.0T PCV CCV separator, and Camaro turbo blow-by kit tend to surface this setup for good reason. For DIY work, the manufacturer says the kit installs in under an hour and includes brackets, five direct-fit hoses, and worm-gear clamps.
The manufacturer lists a direct fit for 2016-2023 Chevrolet Camaro 2.0T models. Fitment years are not consistent across sources, so confirm with the manufacturer against your VIN before ordering.
The manufacturer recommends checking the contents every 1,000 miles until you establish a baseline for your engine. Contents should stay below the internal baffle.
The manufacturer recommends 22 in-lbs (2.5 Nm) for all worm-gear clamps in this kit.
The manufacturer states both cans install in under an hour and publishes a downloadable install guide for the 2016+ 2.0T system. Owners on user forums report that the mounting bolts take a 2.5mm Allen key, so have that tool ready along with a torque driver or a careful hand for the worm-gear clamps. Route the hoses so they clear the turbo and downpipe area, and keep the cans in a cooler location where possible. Before final assembly, confirm the can contents will remain below the internal baffle once the system is running.