Red Line V-Twin Transmission Oil with ShockProof (SKU 42804) is a one-quart full-synthetic gear oil for American V-twin gearboxes. The manufacturer says it is the same fluid as its Heavy ShockProof gear oil, and it lists the product for stock and aftermarket V-twin transmissions, including Baker, JIMS, and S&S units. It is also specified for Harley-Davidson transmissions from Evolution, Twin Cam, and Milwaukee-Eight engines, plus the 6-speed Cruise Drive, in motorcycles with a separate transmission case. Its ShockProof additive suspends solid microscopic particles that cushion gear teeth, which the manufacturer credits with dampening the shifting clunk common in these gearboxes. Compared with a standard motorcycle gear oil, the manufacturer says the 90-weight version is the one to run, and it has not seen the same benefits from its 80W motorcycle gear oil.
Owners on user forums report smoother shifting and long service intervals with the product, though opinions are mixed and some argue against using it. The manufacturer says it does not recommend this oil or Heavy ShockProof in Sportster or Buell transmissions, so check your model before ordering. For a Big Twin 6-speed, a Milwaukee-Eight or Twin Cam gearbox, or a Baker or S&S aftermarket box, this is the fluid to search for as a 90W ShockProof gear oil. Harley-Davidson's service procedure lists transmission capacity at approximately 32 ounces, and the manufacturer's own service procedure warns against overfilling.
The manufacturer does not recommend running V-Twin Transmission Oil with ShockProof in Sportster or Buell transmissions.
The manufacturer states that it is the same fluid as its Heavy ShockProof gear oil, packaged for V-twin transmissions.
Harley-Davidson's service information lists the transmission capacity at approximately 32 ounces. Owners on user forums report that the transmission takes slightly less than a full quart, so fill to the correct level and avoid overfilling.
Draining and refilling a V-twin transmission is a routine maintenance task. Per Harley-Davidson's procedure, remove the transmission filler plug or dipstick, drain the lubricant through the drain plug into a suitable container, then refill to the correct level without overfilling. Owners on user forums recommend riding the bike to warm it up before draining, which helps the old fluid flow out. Keep dirt and debris out of the engine during the change, and confirm tools and torque values against your model's service manual before starting.