The Mishimoto MMLG-SP1415-24BL is a 24-piece set of M14 x 1.5 spiked lug nuts made from cold-forged carbon steel. The manufacturer describes a 4-inch spike design with an electroplated finish, and this set is blue. It is a cosmetic upgrade with a durability argument: a one-piece steel body and a corrosion-resistant plating, backed by Mishimoto's Lifetime Warranty. Choose it over a basic stock nut when you want a visible wheel upgrade without giving up a solid, single-piece build. It is a practical choice for blue spiked lug nut M14x1.5 and acorn-seat wheel searches.
Fitment is the first check. The manufacturer states these fit vehicles with M14x1.5 studs and acorn-style seats, and it publishes a wheel fitment guide for application details. Confirm both your stud thread and your wheel seat before ordering, because a mismatched seat or thread will not clamp correctly. The set includes a deep-well socket with 19mm and 21mm hex ends, so you can tighten the nuts with a torque wrench without buying a special tool. Install is rated Easy by the manufacturer, and the process is a standard hand-start, star-pattern tightening sequence.
The manufacturer specifies these are for vehicles with M14x1.5 studs and acorn-style seats. It also publishes a wheel fitment guide, so check that guide against your vehicle and wheels before ordering.
According to the manufacturer, the set includes 24 spiked lug nuts, one deep-well socket, and the Mishimoto Lifetime Warranty.
The manufacturer rates this set as an easy installation, and the included deep-well socket with 19mm and 21mm hex ends covers the nut sizing. Hand-start every nut first. If a nut does not spin on freely, stop, because the thread may be wrong or damaged. Tighten in a star pattern to the torque specification for your vehicle, using a torque wrench rather than guessing. Re-check torque after the first few drives, since new seats often settle slightly. Avoid cross-threading and avoid tightening one nut fully before the others.