Year range · Make · Model · Engine Type · Drivetrain 2001-2012 · Ford · Escape · 4 cyl / V6 · 2WD / 4WD. The H&R 51601 is a sport coil spring set for that range, aimed at buyers who want a lower stance and sharper turn-in without a full coilover build. Its advertised drop is about 1.5 inches at each axle, a figure owners on user forums say they have seen cited for this kit. Lowering the center of gravity is what makes these springs worth the money over stock: Lowers Center of gravity for improved handling. Owners on user forums report that the ride firms up only modestly. Real-world drop varies: one 2011 XLT 3.0 owner reported a noticeably larger drop than advertised, so plan on a measured before-and-after height check. Search terms this kit matches include H&R 51601 Escape sport springs, 2001-2012 Escape 2WD 4WD V6 lowering springs, and Escape V6 front and rear drop springs.
Listings show the kit for 2001-2012 Escape 2WD and 4WD models with the 4-cylinder and V6 engines, but application lists vary by source. Confirm your year, engine, and drivetrain against the manufacturer's application data before ordering.
The advertised figure is about 1.5 inches front and rear. Owners on user forums report results that differ from that figure, including a larger drop on a 2011 XLT 3.0, so expect variation.
Owners on user forums commonly report that lowering changes camber and toe enough to warrant a wheel alignment afterward.
Installation involves compressing the factory springs or lowering the control arm with a jack, so it is a moderate-difficulty job that needs jack stands and a spring compressor for the front struts. Owners on user forums note that the rear springs can be removed with a jack and without a compressor, and some report rear bump stops rubbing after install and needing to be trimmed. Plan on a four-wheel alignment once the car is down.