The Eibach PRO-LIFT-KIT HD rear springs (part E30-35-066-04-02) are heavy-duty rear springs for the 2024-2026 Ford Ranger Raptor Double Cab with the 3.0L twin-turbo six-cylinder and 4x4 drivetrain. Eibach rates them at roughly 2.5 inches of rear lift with no added load, tapering to zero at 1,000 lbs of constant rear weight, so the truck keeps its stance when a rooftop tent, steel bumper, or swingout is mounted out back. Compared with standard rear lift springs, the HD set adds spring rate to counter rear sag under cargo, and it removes the need for airbags or spacers. Enthusiasts searching for a 2024 Raptor heavy-load rear lift spring or a Ranger Raptor overland rear sag fix will find this set built for that job.
Fitment centers on the factory FOX electronic shocks, which the manufacturer names as the intended damper for this part. Eibach's HD line description also references Pro-Truck Sport shocks, so confirm the damper pairing with the manufacturer before ordering. The HD springs are designed to work with vehicles already equipped with PRO-LIFT-KIT or PRO-TRUCK-LIFT components, which makes them a practical choice for a Raptor that already carries a front Eibach lift.
The manufacturer lists this part for the 2024-2026 Ford Ranger Raptor Double Cab with the 3.0L 6-cylinder twin-turbo engine in 4x4 configuration.
The manufacturer states the springs are designed to use OE FOX electronic shocks. Its HD line description also mentions Pro-Truck Sport shocks, so confirm the intended damper pairing with the manufacturer before installation.
The manufacturer recommends running the springs at their fully loaded height, with the other listed heights provided for reference only. It also warns that too much lift will cause poor ride quality.
The manufacturer's general PRO-LIFT install guidance calls for checking wheel alignment (camber, caster, and toe) after the springs are installed, along with fender clearance and brake line clearance.
The manufacturer's general PRO-LIFT install sheets recommend a hoist, which substantially reduces installation time, and require the vehicle to be supported on safety stands with the wheels blocked. Owners on user forums describe the process as manageable for a home mechanic but fiddly, particularly when removing stubborn lower shock fasteners and aligning the rear axle with the shock lower mounts. Follow the manufacturer's general guidance: install the springs with the Eibach logo facing up, retain the original spring isolators, dampers, and tubing, avoid impact tools on shock piston components and rod nuts, and check alignment and brake line clearance once the job is finished. Confirm the specific install sheet for this part number with the manufacturer, since the HD rear sheet for this application was not verified during research.