Need a red dust, marker, or scene lens for your Baja Designs light, or a fresh lens after a rock strike? This S2 Series replacement lens kit is built on the manufacturer's uService lens-swap design, so you can replace the lens without buying a new light. Each kit contains one red lens and one O-ring. The manufacturer describes red as a dust, marker, or scene color, and it is intended for the S2 Sport only.
Swapping a damaged lens for this kit costs less than replacing the whole light and keeps your existing housing. The O-ring is what maintains the seal, and the manufacturer rates the lights IP69K for waterproof and dustproof protection, so reinstalling the seal correctly protects the electronics. The manufacturer says lens changes made this way will not void the warranty. Before ordering, confirm your fixture: the manufacturer lists these kits for the S2 Sport and S2 Pro auxiliary lights, but red is for the S2 Sport only. Searches for red S2 Sport lens replacement, Baja Designs uService lens swap, and IP69K O-ring lens kit usually lead to this exact part.
The job is a lens-and-O-ring swap, not a wiring job. The kit comes with the manufacturer's uService instructions, which walk through removing the old lens and seating the new one. Keep the O-ring clean and fully seated, since it provides the seal. If your light is an SAE or DOT-compliant S2 model, the manufacturer states those lights are not designed for user lens replacement, so check the light type before you start.
The manufacturer lists S2 Series lens kits for the S2 Sport and S2 Pro auxiliary lights, but states that red lenses are for the S2 Sport only. Confirm your light model before ordering.
The manufacturer states that its uService design lets you replace lenses without voiding the light's warranty.
The manufacturer states that its SAE and DOT-compliant lights are engineered for on-road compliance and are not designed for user-serviceable lens replacement.
This is a lens-and-O-ring swap that the manufacturer says can be done at home or on the trail. Follow the uService instructions included with the kit, and use the new O-ring supplied in the kit, since the seal maintains the IP69K rating. Verify your light is an S2 Sport before installing the red lens, and handle the lens by its edges to keep the optical surface clean.
