The Baja Designs S1 Amber Wide Cornering LED Light with Mounting Bracket (pair, MPN 387815) is a set of two compact 2.1-inch LED pods, each driven by a single 20-watt LED. Each light has a hard-anodized, powder-coated cast aluminum housing, a billet aluminum bezel, and an amber hardcoated polycarbonate lens. The wide cornering pattern is Baja's beam for side-to-side spread at the edges of a turn or trail, and owners on user forums often prefer amber over clear for dust, fog, and snow because the warmer tint reflects less back into the driver's view.
Compared with stock fog lamps or a cheaper generic pod, the S1 is built to a higher durability standard. The manufacturer cites MIL-STD-810G testing, IP69K waterproofing that tolerates pressure washing, and IK10 impact rating, backed by a limited lifetime warranty. Its uService design lets you replace a damaged lens or optic rather than the whole pod. Because the pods are listed as universal fitment, the included bracket and stainless hardware are your mounting path, so plan the location and wiring before drilling. Search terms this pair targets include amber wide cornering LED pods, 2.1 inch LED light pod pair, IP69K off-road LED with bracket, and Baja S1 387815.
The manufacturer lists the S1 light pods under universal fitment, so there is no vehicle-specific bracket for this part. Mounting location, wire routing, and switching are up to the installer.
Per the manufacturer, the S1 uses uService technology, which is designed so that a damaged lens or optic can be replaced instead of the entire light.
Owners on user forums say amber reduces glare reflecting back from snow and rain and softens the look of white headlight output. Clear lenses are generally preferred for maximum output, so pick based on your conditions.
The mounting bracket and stainless steel hardware are included, so the install is mostly about choosing a location with a clear view of the road edge and drilling accurate holes. Owners on user forums have built their own aluminum brackets when a factory-style mount did not suit their vehicle, then tied the pods into an existing auxiliary switch or circuit, sometimes using a relay. Size the fuse and relay for the combined draw of both lights, and check your vehicle's wiring diagram before splicing. I could not retrieve a current installation sheet for MPN 387815, so confirm the mounting steps and wiring details against the manufacturer's install documentation before you start.
