The Baja Designs 8 XL Pro Linkable LED light bar (MPN 740014) is a modular kit that chains eight XL Pro forward-projecting lights into one bar, built around the brand's XL shallow moto housing. The manufacturer rates each light at 4,095 lumens and uses 5000K daylight output, which it says reduces driver fatigue. The pre-load kit, black rock guards, and wiring harness are included. Each light's ClearView optics aim its beam where it is needed, so the bar delivers usable light on trails and desert runs rather than scattered glare. The 8 XL Pro linkable light bar kit suits buyers who want more light than a fixed bar and more aiming control than a single pod.
Compared with stock lighting or a cheaper fixed bar, the value here is adjustability and backing. Each light tilts up to 45 degrees vertically, either individually or as the whole bar, and pivots up to 20 degrees horizontally, so you can run the bar straight or in an arc that follows a bumper or roofline. The manufacturer also backs the line with a limited lifetime warranty and a 30-day money-back guarantee. Owners who want longer service life can use the replaceable lenses and optics the brand offers.
The kit is listed as universal fit, but the XL Linkable mounting brackets (748000) are not in the box and must be ordered separately. For six- to eight-link systems, the manufacturer's pre-load mount (748002) takes weight off the center of the bar and reduces vibration. Builders mounting an eight-light XL linkable bar on a front hoop have reported needing longer hardware and trimming the pre-load bracket to clear the hoop curves, so measure before you drill.
The manufacturer states that the XL Linkable standard brackets (748000) are the applicable brackets for flat-surface mounting, and they are not included with this kit. Confirm your mounting surface and bracket count before ordering.
The manufacturer describes the pre-load mount (748002) as designed for six, seven, or eight linked lights. It takes the load off the center of the light system and helps prevent vibration.
The manufacturer says the XL Linkable system can be built with three up to nine lights, in straight or arced layouts. Its add-a-light kit documentation covers the XL Sport, so confirm compatibility with the manufacturer before adding XL Pro lights to an existing system.
The manufacturer publishes an XL Linkable installation sheet, which you should read in full before drilling. Owners on user forums who installed an eight-light XL linkable bar on a curved front hoop reported that the standard mounts would not fit their planned layout, so they moved the adjustable mounts between lights and used longer screws than the stock hardware. They also trimmed a portion of the pre-load bracket to clear the hoop. Plan for mounting-position changes, dry-fit the bar, and confirm the harness routing before final tightening. Check the installation sheet for the specific tools and torque values, because I could not confirm them in my research.
