The Baja Designs 640134 is a universal UTV RTL-S turn signal harness made for the brand's RTL-S rear light bar, whose amber sections can be set up as directional lamps. The kit includes a blue-backlit rocker switch that the manufacturer designs to sit in the factory dash opening, and the harness feeds running, brake, and cargo/reverse functions. For owners who would otherwise add an external flasher or an sPOD-style switch panel to get on-road signaling, this integrated dash switch is the more direct route, and it keeps the stock dash looking uncluttered.
Because the RTL-S bar ships without a wiring harness, this kit is a required purchase, not an optional upgrade. Generic turn signal kits still leave you sourcing a suitable switch, sorting out brake and reverse circuits, and guessing at compatibility with the bar. Trail riders searching for a Baja Designs RTL-S turn signal harness, UTV dash-switch turn signal wiring, or RTL-S amber flashing signal setup will find this kit's application spelled out directly by the manufacturer. Fitment is listed as universal, so measure your dash opening before ordering and plan the cable route from the dash to the rear bar, especially on longer chassis.
No. The manufacturer states that the RTL-S bar does not include a wiring harness and directs buyers to purchase the 640134 RTL-S Turn Signal Harness separately.
The manufacturer lists the harness as universal and does not tie it to a particular UTV model. Confirm that your vehicle's dash opening will accept the rocker switch before you buy.
The switch is included, but the manufacturer lists mounting hardware as not included, so plan on reusing the factory dash opening without additional brackets.
The manufacturer says the RTL-S amber sections offer individual controls and can be configured as turn signals for on-road driving when paired with an external flasher or an sPOD or similar switch panel.
The rocker switch is designed to install directly into the factory dash location, and the harness is built to power the bar's running, brake, and cargo/reverse functions. Since mounting hardware is not included, verify the dash opening size and mounting method before starting. Plan the wire routing from the dash to the rear bar early, and confirm connections with the manufacturer, as no installation sheet was confirmed during research for this part.
