This FOX eyelet shock body cap (part number 206-06-047) is a replacement end cap for an internal floating piston (IFP) shock body. The manufacturer's exploded-view diagram for its 2.0 P.S. IFP shock lists a body cap alongside the eyelet, eyelet spacer, and retaining ring, so it is a serviceable component rather than a complete damper. Owners on user forums describe the IFP as the divider that keeps shock oil apart from the nitrogen side, which is why a sound body cap matters when you rebuild a shock.
Buying a single cap costs far less than replacing a whole shock, and it lets you restore a worn damper to service. Forum members who have opened these units warn that a pipe wrench can tear the soft aluminum, and a spanner wrench is the tool they reached for instead. Keeping a spare cap on hand before you open a shock avoids the situation where a damaged cap ends the rebuild. Fitment should be confirmed with the manufacturer before ordering, because vehicle applications for this cap could not be verified against the manufacturer's own listing. Search terms that fit this part include FOX IFP shock body cap replacement, 206-06-047 eyelet cap, and FOX shock rebuild body cap.
The manufacturer's exploded-view diagram for its 2.0 P.S. IFP shock places the body cap among the eyelet and retaining components that make up the shock body assembly, so it is part of the pressure-holding structure of the shock.
User forums report that a pipe wrench tears the aluminum body, while a spanner wrench that engages the cap's pin holes is the more practical tool. Forum members also note that a set screw can lock the cap in place, so check for and back out any set screw before applying force.
The manufacturer advises replacing the nut every time it is removed. Owners on user forums acknowledge that many people skip this step, so it is worth checking the nut's condition before reassembly.
This is a rebuild-level job rather than a bolt-on install, and it is best suited to someone comfortable servicing a shock. Fully depressurize the shock first, then use a vise to hold the body while you work. Per the manufacturer's rebuild instructions, nitrogen should be used at no more than 50 PSI to push out the IFP, and the shaft nut is torqued to 30 ft-lb. Plan on a spanner wrench, a torque wrench, a nitrogen source, and fresh shock oil and seals. The main gotchas are a cap that is seized from corrosion or previous overtightening, and reinstalling the IFP at the wrong depth, which affects damping and nitrogen charge. Confirm the correct IFP depth and fitment with the manufacturer before reassembly.