Mishimoto's MMFT-M20-34BK is a two-pack of straight adapters that convert an M20x1.5 port to a 3/4-inch push-on hose barb for the brand's Universal Baffled Parallel Port Catch Can. The manufacturer describes them as CNC-machined 6061 aluminum with a black anodized finish, and the threads are sealed with a Viton O-ring. Their main advantage is line size. The can's included fittings are 1/2-inch, so these let you run a larger 3/4-inch CCV/PCV hose, and the manufacturer backs them with its Lifetime Warranty. For a boosted or track-driven engine's crankcase vent, that sealed, anodized aluminum build is a sturdier choice than a loose barb from a generic kit.
Fitment depends on the catch can's port thread rather than the vehicle, so confirm you have M20x1.5 O-ring-faced ports before ordering. Owners on user forums have found that a stock PCV hose can measure 5/8-inch for most of its length and only reach 3/4-inch at one end, so measure your hose before buying 3/4-inch silicone. Searches for M20x1.5 catch can fitting, 3/4 hose barb adapter, parallel port PCV line, and black anodized 6061 catch can fitting tend to lead to this exact part.
No. The manufacturer lists the parallel port can's included fittings as 1/2-inch, so this 3/4-inch pair is sold as a separate add-on for larger hose.
Check first. Owners on user forums report that some stock hoses are 5/8-inch for most of their length and only expand to 3/4-inch at one end. Measure your hose and confirm the fit before ordering.
The manufacturer's install sheet for its baffled catch can says to lubricate the O-rings with engine oil, snug the fittings down with a 7/8-inch wrench, and avoid overtightening.
This is a simple thread-in job that most DIYers can finish in one session. Per the manufacturer's install sheet for its baffled catch can, let the engine cool completely first, then lubricate the O-rings with engine oil and thread the fittings into the can by hand before snugging them with a 7/8-inch wrench. Do not overtighten, since the aluminum threads and O-rings are what seal the can. Because that sheet was written for a complete kit rather than this two-pack, confirm the thread and seal match your can before final torque, then pressure-check the connections for leaks.