The KW V1 coilover kit (part 10287010) is the entry model in KW's INOX-LINE range for the Tesla Model Y AWD. It pairs coilover struts, springs, and dampers that KW calibrates for each vehicle, so you get adjustable lowering with a factory-preset damper setup instead of a generic tune. Owners on user forums describe the V1 as a sound choice when the goal is a lower stance without giving up everyday comfort, and some point to its stainless steel body as the main advantage over galvanized alternatives in corrosion-prone climates. Buyers who want adjustable damping need to step up to KW's V3 instead.
If you are searching for a stainless Model Y AWD lowering coilover with fixed damping and a set-and-forget setup, this kit fits that brief. Fitment listings disagree on which model years are covered, so match your VIN and trim before ordering. A home mechanic with a lift or jack stands can handle the install, though confirm the details against the manufacturer's installation documents. Ride height is set during installation, so plan to check alignment once the car is lowered.
No. Owners on user forums note that the V1 does not offer damping adjustment. Only ride height is adjustable. Buyers who want to tune compression and rebound need the KW V3 instead.
Owners on user forums describe the MPP Comfort kit as essentially a repackaged KW V1, so the two share the same core design. Compare warranty terms before choosing between them.
User forums report that the V1's stainless steel body makes it the better pick over galvanized options in areas with road salt or humidity.
Owners on user forums who fitted KW coilovers to a Model Y describe the job as manageable at home, though a lift makes it easier. A two-jack floor setup also works, and the front upper mount does not need to be detached. The ABS sensor wire does need careful removal with a trim tool. Torque the front upper shock bolts to the value in the installation manual, and keep the adjuster lock screws at very light torque to avoid overtightening. If you use a lift, plan for a separate jack to support the rear control arm bolt. Schedule an alignment after the car is lowered.