The K&N VF2076 is a washable, reusable replacement cabin air filter for the Nissan Altima's glovebox-housed HVAC intake, and it suits 2019-2020 Altima owners who want a long-term alternative to disposable cabin filters. Its non-woven synthetic media is pre-treated and drops into the factory housing with no custom fitting. Because you clean and reinstall it rather than replace it, it works as a durable cabin filter rather than a recurring consumable.
Compared with a disposable stock filter, the manufacturer says the treated media helps capture odor-causing contaminants and that increased airflow improves heating and cooling efficiency. It carries a No-Hassle Lifetime Limited warranty, which adds value over the life of the vehicle. K&N advises against cleaning with other detergents or solvents because they can damage the media, so use only approved cleaning products when servicing it.
Check fitment before ordering: the manufacturer's Altima listing shows 2020 through 2022 models, while other listings extend coverage to 2019 and later years, so confirm your model year and engine with the manufacturer. The manufacturer states installation typically takes under five minutes with no tools, but owner guides for the 2019-2024 Altima describe removing the glovebox stops and unclipping the filter housing cover, and some call for a Phillips screwdriver and plastic pry tool. Note the filter's airflow orientation before pulling the old one out.
The manufacturer's Altima listing shows 2020 through 2022 models, while other listings show 2019 and later years. Confirm your exact model year and engine with the manufacturer before ordering.
Yes. The manufacturer describes it as washable and reusable. It also advises against using other detergents or solvents on K&N cabin filters, as they may damage the filter media.
The manufacturer says its treated media is designed to help control odors and notes that dirty disposable filters can cause a musty smell inside the car.
This is a beginner-friendly glovebox job. The manufacturer says the filter typically installs in under five minutes with no tools. Owner guides for the Altima describe lowering the glovebox by removing its stops, then unclipping the cover on the filter housing. Expect to need a Phillips screwdriver and a plastic trim tool, and take care not to let the glovebox drop, since it can strain its wiring and attachments. Slide out the old filter, note its airflow orientation, and insert the new one the same way.
