The K&N VF3009 is a reusable, washable cabin air filter sized for the glove-box housing of the 3.0L V6 Audi SQ5. The manufacturer describes the K&N Lifetime Washable Cabin Air Filter for the 3.0L V6 gas SQ5 as washable and reusable. Its synthetic media is electrostatically charged to grab and hold dust particles, and the manufacturer says it helps control odors and capture mold, mildew, and bacteria. Over time, washing and re-treating one filter costs less than buying disposable replacements, and the manufacturer claims increased airflow improves heating/cooling efficiency. Its Audi SQ5 page is also a useful reference for the 3.0L V6 gas application.
Confirm fitment before ordering: the manufacturer's SQ5 application listing shows the VF3009 for 2016, 2015, and 2014 SQ5 3.0L V6 gas models, and its install sheet directs buyers to the current catalog for applications. The filter installs behind the glove box and is pre-treated and ready to drop into your factory air box. For a reusable SQ5 cabin filter, the manufacturer recommends refreshing it every 12 months, or 12,000 miles, using its K&N Refresher kit pt. 99-6000. Search terms this matches include K&N VF3009 Audi SQ5, reusable SQ5 cabin air filter, and washable glove box cabin filter.
The manufacturer's SQ5 application page lists this filter for 2013 through 2017 SQ5 models with the 3.0L V6, but its install sheet tells buyers to check the current catalog for applications. Confirm your model year and VIN with the manufacturer before ordering.
The manufacturer recommends refreshing the filter every 12 months or 12,000 miles, using its Refresher kit part number 99-6000.
Per the manufacturer's install instructions, the angled side of the filter goes on the right-hand side, and the cut-out on that side helps with seating it.
The manufacturer's instructions include a K&N Stop Decal to apply after installation, which notifies others that the cabin filter is reusable.
This is a beginner-level job. The manufacturer's instructions have you locate and remove the screws that access the cabin filter housing, slide the cover off to the right, remove the dirty filter, and clear debris from the housing. Install the K&N cabin filter in the air box with the angled side on the right; the cut-out on the right side of the filter helps with installation. Reinstall the cover, then apply the stop decal. Manufacturer materials list install times differently, with one stating less than five minutes with no tools, and another listing 10-20 minutes with a screwdriver, so plan for a screwdriver and a short session. Check your owner's manual for SQ5-specific steps.
