The K&N VF3018 is a washable, reusable replacement for the factory cabin air filter in Chevrolet Corvette C6 and C7 models, and it is also listed for Z06 and ZR1 applications. Its non-woven synthetic media is electrostatically charged to hold dust and pollen, and K&N says it is treated to help control odors. Buy it instead of a standard paper filter if you want to stop repeating that purchase at every service interval. You clean and reinstall it, so the cost is spread over the life of the car. Owners who drive on dusty roads or near traffic will get the most value from that trade-off.
The filter drops into the factory cabin filter housing, which the manufacturer's install sheet places inside the engine compartment on the passenger side. Removal is straightforward: unclip the housing cover, lift out the old filter, clear debris from the housing, and seat the K&N with its logo facing up. The manufacturer recommends refreshing it every 12 months or 12,000 miles using refresher kit 99-6000. Application years are described differently across sources, so confirm your exact model year and submodel with K&N before ordering.
Searchers looking for this part often use terms like reusable Corvette cabin air filter C6 Z06 ZR1, washable C7 Corvette cabin filter VF3018, and K&N cabin filter no tools install. It keeps the factory air box and HVAC layout unchanged, which makes it a direct-fit upgrade rather than a modification.
The manufacturer's installation sheet places the cabin filter housing inside the engine compartment on the passenger side of the vehicle.
The manufacturer recommends refreshing the filter every 12 months or 12,000 miles, and it offers refresher kit 99-6000 for that service.
Yes. The manufacturer says to install the filter with the K&N logo right side up.
Per the manufacturer, this is a quick, no-tools job that typically takes less than five minutes. Open the housing cover by unfastening its clips, remove the dirty filter, and wipe out any dirt or debris in the housing before seating the new filter. Check the logo orientation before you close the cover. Once it is in, the manufacturer advises placing its stop decal on a cleaned area of the housing to signal that the filter is reusable. Use the owner's manual for model-specific removal steps if your car's layout differs.
