The PowerStop SSH720 is a rear drum brake shoe set from the brand's Autospecialty stock-replacement line, sold with spring and hold-down hardware. The manufacturer describes the shoes as semi-metallic and post cured for more brake power and shorter break-in time. They are built from new steel with a rust-resistant coating, precision cam ground for proper fitment to the drum and chamfered to prevent noise and chatter. For a 2000-2005 Pontiac Grand Am owner, that combination targets a quiet, dependable rear-brake refresh without the cost of a full drum-and-shoe kit. Searches like "Grand Am rear drum brake shoes w/ hardware," "SSH720 semi-metallic post-cured shoes," and "copper-free asbestos-free Grand Am rear brakes" point to this exact application.
The manufacturer states that the shoes are 100% asbestos-free and copper-free, and that the kit includes spring and hold-down hardware, which makes it easier to complete your brake job. PowerStop backs the product with a 90 day or 3,000 mile warranty against defects in materials or workmanship. Choose this set over bare, lower-cost shoes when you want the springs and pins replaced at the same time as the linings, rather than reusing worn hardware on a car that is already due for service.
Yes. The manufacturer states that spring and hold-down hardware is included with the Autospecialty brake shoes, so you do not need to source it separately.
The manufacturer states that the Autospecialty shoes are 100% asbestos-free and copper-free.
The manufacturer warrants the product against defects in materials or workmanship for 90 days from purchase or 3,000 miles of use, whichever occurs first.
Owners on user forums report that a rust ridge on the inner edge of the drum can hold it in place. Owners suggest removing that lip with an abrasive flapper wheel before forcing the drum off.
Rear drum shoe replacement is a moderate-difficulty job for a home mechanic with basic hand tools and a brake spring tool. Replace both shoes on the same axle at once so braking stays even side to side. Owners on user forums warn that the parking brake must be fully released before setting the shoes and drums, because a partially applied lever makes the drum fit wrong and the shoes hard to adjust. Inspect the drum surface, the wheel cylinders, and the backing plate while the assembly is open, and lubricate the backing plate contact points. Before ordering, confirm your car has rear drum brakes rather than rear discs, since drum shoes only apply to drum systems.