The EBC GD7241 is a front sport rotor from EBC's GD range, built around wide-aperture slots that the manufacturer says cool the braking surface and reduce fade. Designed with wide aperture slots to allow cooling GD Sport Rotors have much less brake fade. Dimpling is part of the design, and the slots help keep pad contact clean and even as pads wear. EBC Brakes manufactures many of its rotor ranges in ISO and TÜV approved facilities in the UK or in Italy. For a 5.7L HEMI 300C, that means a rotor that runs cooler and holds its bite through repeated stops, which a stock disc does not prioritize.
Choose this rotor over a plain stock replacement when you plan harder street driving, canyon runs, or occasional track sessions, because cooling is where the GD design earns its price. Pairing matters. Not ideal for track use, although many drivers have used Greenstuff 2000 for Hillclimb and lighter cars on the track, so consider a higher-temperature EBC pad if the car sees the track. This is a bolt-on front axle job for a 2005-2010 Chrysler 300C 5.7L, so search terms like "GD7241 300C 5.7 HEMI slotted front rotors," "EBC GD sport front rotor 300C upgrade," and "dimpled slotted rotor 300C brake fade" match what buyers look for.
The manufacturer describes Greenstuff as a street-focused sport pad. It says the pad is not ideal for track use, though some drivers have used it for hillclimbs and lighter cars on track. For faster street driving the manufacturer points to its Yellowstuff grade, and for race use it points to Bluestuff or its RP and SR series.
The manufacturer lists four sport rotor choices: a premium non-slotted OEM-style disc, the GD design, USR, and BSD. The GD design is the wide-aperture slotted option aimed at reducing brake fade.
This is a conventional front brake rotor swap, so it suits a home mechanic with basic tools, a jack and stands, and a torque wrench. Before ordering, measure your existing rotor's outside diameter, since front rotor sizes can vary within this platform. Remove the wheel, the caliper, and the caliper bracket, and hang the caliper so the brake hose is not stressed. Clean the hub face and the rotor's mating surface so the new disc seats flat, and apply a thin coat of high-temperature brake grease to the caliper slide pins and bracket shims. Finish by bedding in the pads and torquing the wheel lugs to specification.