The Power Stop K8673 is a front-axle brake upgrade for the Lincoln Aviator, built on the brand's Z23 Evolution Sport platform. Along with increased braking power, the Carbon-Fiber Ceramic brake pads feature a low-dust formula, and these pads combine with Drilled & Slotted rotors, so pads and discs arrive as one matched front set.
The case for this kit over a basic pad swap is the complete package: pads, rotors, and hardware come together, and the bedding procedure matters. The manufacturer calls break-in critical for optimal performance. Its routine has you make repeated firm stops from 40 mph down to 10 mph without letting the brakes cool, which helps establish an even layer of friction material deposited on the rotors from the brake pads. Skipping that step is where street-driven setups usually lose their edge.
Before ordering, confirm your exact model year and trim, since published year ranges for this Aviator kit differ. Plan on a standard front brake job with a jack, stands, and a torque wrench, and treat the caliper and hose carefully during removal. Search terms buyers use for this job include "2020 Aviator front brake upgrade," "Z23 carbon ceramic pads Aviator," and "drilled slotted rotors Lincoln Aviator DIY."
Yes. The manufacturer's procedure calls for a series of controlled stops from 40 mph to 10 mph without coming to a full stop, followed by cooling stops. Owners should expect a resin smell as the brakes heat up during this process.
Published year ranges vary between sources, so the manufacturer should be contacted to confirm fitment for your specific model year and trim before ordering.
This is a front brake pad and rotor job, which is manageable for a confident DIYer with a jack, stands, socket set, and torque wrench. Per the manufacturer's service manual, do not let the caliper hang from the brake hose and do not pry through the caliper sight hole to retract the pistons. Retract the pistons with a C-clamp and a worn pad, and install new pad clips and the included hardware. Activate brake service mode before the job and deactivate it afterward. Torque the caliper guide pin bolts to the value in the service manual, since torque figures from secondary sources conflict. Check rotor runout before final assembly, and bed in the new pads as described above.