The PowerStop K8336 is a rear brake upgrade from the Z23 Evolution Sport line, built around carbon-fiber ceramic brake pads that feature a low-dust formula. The pads are matched to drilled and slotted rotors, and the kit includes premium stainless-steel hardware and a pin bushing kit. Compared with a basic stock-style replacement, the appeal is a pad compound and rotor design aimed at a daily driver who occasionally pushes the car harder, with less brake dust on the wheels. Toyota owner forums have reported mixed reviews, mainly on the pads, so a proper bedding process matters. Searches for Corolla rear Z23 carbon-ceramic pads, drilled slotted rear rotors, and PowerStop bedding procedure all point to this kit's core use case.
Yes. The manufacturer's guidance for pads paired with drilled and slotted rotors calls for five moderate-to-aggressive stops from 40 mph down to 10 mph without coming to a complete stop, followed by five moderate stops from 35 mph to 5 mph. Afterward, drive at moderate speed for about five minutes to let the brakes cool, and expect a resin smell while the brakes heat up.
Year coverage varies across the listings reviewed, ranging from 2019 only to 2019 through 2024. Confirm your exact year, trim, and engine with the manufacturer's fitment lookup before purchasing.
The manufacturer directs installers to the vehicle's service manual or a professional installer for complete procedures, so check the factory torque and sequence specs first. Raise the car only on level ground and support it on jack stands, never on a jack alone. Because the new pads are thicker than worn ones, the caliper piston must be pushed back into the caliper; the manufacturer's instructions describe opening the bleeder screw and using a C-clamp with a used pad over the piston face to protect it. Plan on completing the bedding procedure right after installation, since skipping it can cause uneven pad material transfer and vibration.