The Power Stop KC6376-36 is a rear Z36 Truck & Tow package for the 2013–2019 Ford Explorer. It pairs carbon-fiber ceramic pads with Drilled & Slotted rotors that keep brake temperatures down by maximizing heat dissipation. Two red powder-coated calipers come in the box, so you don't need to source calipers separately. Compared with a pad-only swap, this kit gives you matched pads, rotors, and calipers in one purchase, which matters if your Explorer tows a trailer, hauls loads, or runs larger wheels. The manufacturer positions the line for heavy loads and towing, and its shims are stainless steel for noise-free braking performance. For buyers searching terms like rear Z36 brake kit for towing, Explorer carbon-fiber ceramic pads, and drilled slotted rear rotors with calipers, this kit covers the core upgrade without a custom build. The brake package fits best on Explorers equipped with heavy duty brakes; with vented rear rotors, so check your brake configuration before ordering. The kit ships with premium stainless-steel hardware, for an easy, bolt-on installation. Owners on user forums note that a rear caliper compression kit is needed for the rear calipers, so plan for that tool before you start.
Owners on user forums report that a rear caliper compression tool is needed to retract the piston so the calipers fit over the new pads. A C-clamp can work in some cases, but the forum consensus is to have the proper tool on hand.
Yes. The kit includes two red powder-coated calipers along with the Z36 pads, drilled and slotted rotors, installation hardware, and brake lube.
This is a manageable weekend job for someone comfortable with rear disc brakes, but it is not a beginner task. You will need a torque wrench, a 13mm socket for the caliper hardware, a 19mm socket for the lug nuts, a nylon brush, and a rear caliper compression tool. Hang the caliper with a hook rather than letting it dangle from the brake hose, and avoid twisting the hose when you reposition it. Owners on user forums cite about 24 lb-ft for the rear caliper bolts, but confirm the values in your owner's manual and torque the wheel lug nuts to the manufacturer's specification after reinstalling the wheel.