The Power Stop Z23 Evolution Sport rear kit (K2405) pairs ceramic brake pads with drilled and slotted rotors for the rear axle of the 2003-2009 Lexus GX470. It suits owners who want a matched rear package instead of sourcing pads and rotors separately. Owners on user forums who fitted Power Stop drilled and slotted rotors to their GX470s report quiet, smooth stopping after the initial break-in. One owner whose stock rotors needed resurfacing twice within eighteen months described the kit as a way to stop paying for repeated machining, which is the core value case against a like-for-like OEM replacement.
Fitment is rear-only, so front brakes are not covered by this part number. Forum opinion on slotted rotors is divided: some owners say they are unnecessary on a GX unless the originals are worn, while others say they have run them without warping or noise, so details vary and buyers should confirm specifics with the manufacturer. DIY owners on forums describe rear pad and rotor swaps on this platform as manageable with basic hand tools, a jack, jack stands, and a C-clamp or channel locks for compressing the pads. Shoppers searching for 2003-2009 GX470 rear brake pads and rotors, GX470 rear drilled slotted rotors, or Z23 Evolution Sport ceramic upgrades will find this kit matches those needs.
This part number is the rear kit for the 2003-2009 Lexus GX470. Front brakes require a separate Power Stop part number.
This listing is titled as a pads-and-rotors kit with no caliper reference, so the existing rear calipers are reused. If your calipers are worn or seized, confirm with the manufacturer what replacement options exist before ordering.
Owners on user forums disagree. Some report no warping or noise and value the upgrade over dealer resurfacing, while others argue that blank rotors tolerate heat better and that slotting offers limited benefit on a stock caliper. Details vary, so confirm specifics with the manufacturer.
Owners on user forums generally rate a GX470 rear pad and rotor change as a straightforward DIY job with basic tools. Plan to support the vehicle securely on jack stands with the wheels removed, and use a C-clamp or channel locks to push the pistons back before fitting the new pads. Forum owners also report that caliper slide pins can seize on these trucks, so inspect, clean, and lubricate them during the job rather than assuming they will move freely. Keep the brake fluid reservoir in mind when retracting pistons, and bed in the new pads according to the manufacturer's instructions.