PowerStop's K1905-36 is a front-axle kit from its Z36 Truck & Tow line, built for the 2000-2005 Ford Excursion. Its carbon-fiber ceramic low-dust formula offers extreme braking performance that is designed for trucks without sacrificing everyday drivability. Cross-Drilled & Slotted Rotors allow air to flow through the rotor to dissipate the intense heat. A buyer gets the pads, rotors, and stainless hardware as one matched package, which is the main reason to choose it over a pad-only swap. Heavy towing, hauling a camper or boat, and long mountain descents are the conditions where factory parts fall short and this kit earns its price. Search terms this kit targets include 2000-2005 Excursion front brake upgrade, Z36 ceramic pads for towing, and drilled and slotted rotors for heavy trailers.
The manufacturer's Z36 truck material describes the rotors as Zinc Plated to protect against rust and corrosion. The pads are low-dust and fade-free to help on those long mountain descents. Premium stainless-steel shims provide better heat dissipation and virtually noise-free braking. Because the kit is a front-only set, it suits owners who want better front stopping power without replacing the rear brakes. Confirm your exact submodel and build date before ordering, since Excursion trims and production dates can affect the fitment.
The manufacturer states that its truck brake kits are designed to bolt on in place of the stock rotors and pads, and that the kit includes the hardware needed for installation.
According to the manufacturer, the drilled holes let air flow through the rotor to carry away heat during heavy braking, and the same airflow cools the pad and rotor contact area.
This is a front brake job that a mechanically confident owner can handle at home, and the manufacturer's installation resources cover Z36 truck kits. Work on level ground, loosen the lug nuts before lifting, and support the truck on jack stands placed at the manufacturer's recommended lift points. Keep the caliper hanging so the brake hose is not stretched, and torque the lug nuts and caliper bolts to the factory specification in your service manual. Bed in the new pads using the manufacturer's break-in procedure before any heavy towing.