Free Shipping on Orders Over $99  ·  No Code Needed

Wilwood Clip Kit Pad Pin Retainer D8 / DP6/ TX6R / AERO

*Photo may not represent actual product

The Wilwood 300-14504 is a set of four steel retaining clips for the pad retaining pins on Wilwood DP6, D8, TX6R and Aero brake calipers. Those clips hold the pins in place, which keeps the pads seated under heavy braking. On a track car that sees repeated heat cycles, a loose or fatigued clip is a cheap failure to prevent. Replacing it with a matched Wilwood part costs far less than rebuilding a caliper or chasing a rattling pad mid-session.

Enthusiasts searching for Wilwood DP6 pad pin clips, D8 caliper retainer clips, TX6R pad retaining clip replacement, or Aero caliper pin clip sets are looking for this part. Confirm your caliper family before ordering. The manufacturer lists the 300-17719 as a DP6 kit that includes pins as well as clips, so DP6 owners who need pins should compare the two. For a pad change, the retaining clip is popped off the pin, the pin slides out, and the pads come out for service. Wilwood's assembly sheets for its kits stress that installation should be done by people experienced with disc brake systems, so take the job seriously.

  • Manufacturer Part Number: 300-14504
  • Type: Clip kit, caliper retainer pin
  • Material: Steel
  • Quantity: Set of four retaining clips
  • Compatible Calipers: Wilwood DP6, D8, TX6R and Aero
  • UPC: 889545079944

FAQ:

Which Wilwood calipers does the 300-14504 clip kit fit?

The manufacturer lists this clip kit for Wilwood DP6, D8, TX6R and Aero calipers. Confirm your caliper model against the manufacturer's listing before ordering.

How is the 300-14504 different from the 300-17719 kit?

The manufacturer describes the 300-17719 as a DP6 kit that includes both retaining pins and clips. The 300-14504 is listed as a set of four retaining clips for the D8, DP6, TX6R and Aero group. If you need new pins as well, check the contents of each kit before buying.

Installing it yourself

This is a pad-change job rather than a full brake overhaul, so basic hand tools are usually enough. Remove the pads, pop the clip off the retaining pin, slide the pin out, and install the new clip on the pin. Owners on user forums report that retaining pins can back out when a clip is missing or was never reinstalled after a pad change, so check the clip every time the pads come out. Wilwood's install guidance for its kits calls for experienced installers, and the manufacturer recommends taking photos before disassembly so the parts go back in the right order.

  • MPN: 300-14504
  • Manufactured by: Wilwood
  • Units per SKU: 1
  • In Stock: 6
Exclusive member pricing Free membership — sign in to see your price
Join Free →

$6.01

MSRP / List price
Member Price
Your price after signing in
$6.01
In Stock — ships same day if ordered before 5pm PST
Add to Cart:
MPN
300-14504
Manufacturer
Wilwood
Availability
In Stock (6)
Ships Same Day
Order before 5pm PST and this product ships same day
Member Pricing
Easy Returns
Expert Support
Secure Checkout