The Baja Designs Squadron 2.0 Rock Guard (Single) in clear is a polycarbonate cover made for the Squadron 2.0 Sport and Squadron 2.0 Pro LED auxiliary light pods. It takes the hits from trail rock, mud, and branches so the lens doesn't have to, and a cracked or pitted lens is the expensive failure on an off-road light. The clear version is the choice for lights you run during the day or on night trails, because the manufacturer says it protects the pod without dimming the beam. Black guards with the Baja logo must come off before the pods are switched on. Searching for a Squadron 2.0 Pro rock guard, Squadron 2.0 Sport light cover, or clear LED pod lens protector? This is the guard built for that exact pod line. It snaps on and off in seconds, so you can clean the lens or swap colors without tools.
Fitment is the main thing to confirm before ordering. Baja Designs states the guard was engineered for the Squadron 2.0 Sport and 2.0 Pro pods, and it indicates the 2.0 guards were not designed for the first-generation Squadron. Its Squadron-series guard pages also say the design is not compatible with flush-mount models, so check your pod style before you order. The manufacturer describes the guard as a quick snap-on design with a snug fit, which makes it a practical DIY upgrade for owners who want the protection without a bracket or hardware swap. Owners who plan to run the pods through deep mud or brush should keep a spare clear guard on hand, since replacing a guard costs far less than replacing a lens.
The manufacturer states that the Squadron 2.0 rock guards were designed specifically for the Squadron 2.0 series LED light pods. Confirm your pod generation with the manufacturer before ordering if you are unsure.
The manufacturer describes the clear guard as providing protection with zero light loss. Beam measurements were not confirmed during research, so check with the manufacturer if you need specific numbers.
The manufacturer says the guards install and remove in seconds and fit with a snug, secure feel. For pod-specific steps, refer to the manufacturer's installation sheet for the Squadron 2.0 pods.
The manufacturer's Squadron-series guard pages state the guards are not compatible with flush-mount models. Confirm flush-mount compatibility for the Squadron 2.0 with the manufacturer before purchase.
Installation is designed to be a snap-on job. The manufacturer says the guard is made to install and remove quickly, so you can pull it for cleaning or to switch to a different color without disturbing the pod's wiring or mounting. Because the guard sits over the lens face, take a moment to clean the lens and confirm the guard seats evenly all the way around before you tighten up your mounting and head out. Tool requirements and any pod-specific steps were not confirmed during research, so refer to the manufacturer's Squadron 2.0 installation sheet before you begin.
