For vehicles that call for a Group 27 battery, the Odyssey ODP-AGM27 brings Performance series AGM power with 85Ah at 20 hr (79Ah at 10 hr) and a sealed, spill-proof case. It is part of the Odyssey Performance series and uses pure lead plate AGM construction.
Odyssey positions the Performance series as delivering Extreme-series reliability and deep-cycle capability for the higher accessory loads of modern vehicles, without the highest CCA and reserve capacity of the Extreme line. The operating range is -40F to 140F.
Odyssey rates it at 850 CCA, 1500 pulse hot cranking amps for 5 seconds, 182 minutes of reserve capacity, with 85Ah at 20 hr (79Ah at 10 hr). It measures 12.5 x 6.8 x 8.8 in and weighs 59.7 lb. The warranty is 3 years (36 months) under the EnerSys North America limited warranty. Pick up the Odyssey ODP-AGM27 at Track Ready Products and give your starting system a battery that can keep up.
Before swapping, compare the terminal arrangement, height and footprint with your old battery. Remove negative, then positive, install the Odyssey, and tighten the hold-down so it cannot shift.
Charge it with an AGM-compatible charger. Odyssey lists a minimum recommended charging current of 7.9A. A weak charger that never reaches full charge shortens battery life.
Odyssey's warranty terms call for trickle chargers that hold 13.5 to 13.8V and alternators that deliver 14.0 to 14.7V at the terminals, so check your charging system when you swap.
