The K&N YA-0116 is a reusable, washable drop-in panel filter for the Yamaha YXZ1000R side-by-side, and the manufacturer lists it under its High-Flow Powersports Lifetime Engine Filter line. Because it installs in the stock airbox, it is a direct replacement for the factory primary element. Published fitment year ranges are not consistent, so confirm your exact model year and trim (base, SE, SS, or SS SE) with K&N before ordering.
Owners on user forums often describe the stock oiled foam primary as messy to service, and many replace it after frequent cleaning. A washable, reusable K&N element avoids the recurring cost of buying disposable filters, and it lets you service the air path on your own schedule. Owners who want to avoid oil altogether often turn to dry paper alternatives instead, so the K&N is best suited to riders who are comfortable with a clean-and-oil routine. Searches for YXZ1000R drop-in air filter, YA-0116 washable filter, YXZ1000R primary filter cleaning, and YXZ1000R SS air filter replacement all point to this exact part.
Published year ranges vary, and the manufacturer's own fitment data should be treated as the final authority. Confirm your exact model year and trim with K&N before ordering, and compare the part to your stock filter.
The manufacturer describes the element as washable and reusable. Owners on user forums typically wash it with a solvent or degreaser, let it dry fully, and then apply a light, even coat of filter oil. Service intervals depend heavily on riding conditions and vary from owner to owner.
Owners on user forums say the factory secondary element is harder to reach than the primary, and many leave it in place for added protection. Whether this kit includes or replaces a secondary element was not confirmed during research, so check the packaging or the manufacturer's documentation.
Swapping the primary element is a routine maintenance task, but owners on user forums consistently describe the airbox area as tight and somewhat messy, so allow extra time. Before installing, make sure the airbox sealing surfaces are clean and undamaged. Owners on user forums recommend a thin bead of grease around the filter's sealing edge and along the airbox cover, which helps seal against unfiltered air. Apply filter oil lightly and evenly, because excess oil can migrate into the intake. Avoid compressed air on the cotton element, since owners on user forums report that blasting it can spread the oil. Specific tool requirements and torque values were not confirmed during research, so consult the manufacturer's documentation before starting.
