This Mishimoto transmission cooler is a tube-and-fin replacement core for the 2015-2017 Ford F-150, built to take over from the factory liquid-to-air unit. The core is repositionable, and the manufacturer lists a 184-percent increase in fluid capacity over the stock cooler. Core volume rises 105 percent, with tube surface area up 212 percent and fin surface area up 132 percent. For towing or hauling on a 6R80 or 10R80 automatic, that extra capacity and surface area is the practical reason to pay more than a generic cooler. The cooler carries the Mishimoto Lifetime Warranty.
The manufacturer lists V6, EcoBoost, and V8 applications, including the 2.7L and 3.5L EcoBoost, the 3.3L and 3.7L V6, and the 5.0L V8. Its product page also notes the cooler is meant for trucks already running the factory liquid-to-air arrangement. The product name references the Raptor, but published Raptor coverage varies, so confirm model-year compatibility with the manufacturer before ordering for a Raptor. The manufacturer rates installation difficulty as easy. No modifications are necessary for installation.
The manufacturer lists the 2.7L V6 EcoBoost, 3.5L EcoBoost V6, 3.3L V6, 3.7L V6, and 5.0L V8 engine codes, paired with the 6R80 and 10R80 transmission codes.
The manufacturer states that no modifications are necessary for installation.
The manufacturer's page for this part lists the 2015-2017 F-150 only. Published details on Raptor coverage vary, so confirm model-year compatibility with the manufacturer before purchase.
The manufacturer rates this as an easy install and says no modifications are needed, so it is intended as a direct-fit swap on a factory-equipped truck. Follow the manufacturer's installation instructions for line disconnects and mounting. After the first drive, recheck the transmission fluid level and inspect the cooler connections for leaks.