Looking for a hard tonneau cover for your 2009-2018 Ram 1500 and 2019-2024 Ram 1500 Classic with a 5'7" bed? The BAKFlip G2 Hard Folding Tonneau Cover, part number 226207, is cut for that application. It folds forward against the cab for full bed access, then closes and locks to protect what you carry.
The G2 is the proven BAKFlip design: aluminum-skinned panels, EPDM seals, automatic latching and a no-drill clamp-on install.
Ram owners tend to work the bed hard, and a cover that protects the load without limiting what you can haul does the job.
Light, stiff and made for daily use. Each panel has a solid core wrapped in aircraft-grade aluminum skins, finished in a semi-gloss black powder coat that resists fading, chipping and flaking. Integrated struts hold the folded cover snug against the cab to cut rattle and vibration, and the cover is rated for 300 lb of evenly distributed weight on top.
A sealed perimeter with somewhere for water to go. The EPDM seals hug the bed rails, and the drainage system gives rain and runoff a path that does not run through your cargo area.
It locks as you close it. BAK's patented rail and clamp system uses automatic slam latches, so each panel locks when it shuts. Close the tailgate, press the cover down, and your gear is out of sight and locked in.
Full bed access without removing the cover. The panels fold forward against the cab, so you can drive with the bed open for tall or bulky cargo while the cover stays secured on the truck. Fold it back down and the bed is covered again in seconds.
If you want a hard cover that locks, seals and folds out of the way without a complicated install, the BAK 226207 is built for exactly that. It is assembled in the USA, carries a three-year limited warranty, and ships from Track Ready Products.
This is a clamp-on install: no drilling, hardware included, and a typical time of 30 minutes or less with hand tools.
Clean the bed rail caps first so the seals sit on a clean surface, set the cover in place, and tighten the clamps evenly from side to side. Work the cover open and closed once before you load the bed.
Care is simple: mild automotive soap and water for cleaning, a clamp check after about a week and periodically afterward, the cover secured whenever the truck is moving, and snow and ice cleared before you open it.