226309 is the BAKFlip G2 Hard Folding Tonneau Cover sized for the 2004-2014 Ford F-150 with a 5'7" bed. It is a hard folding tonneau cover, so you get lockable cargo protection and a bed that opens up when the job needs it.
BAK's BAKFlip G2 is a clamp-on hard folding cover with solid-core aluminum panels, a sealed perimeter and automatic slam latches, built for owners who want real cargo security without a complicated install. It is compatible with BAK's BAKBox2 storage box.
The F-150 bed does a lot of different jobs. A hard cover protects the cargo on the way, and opens fully for the jobs that need the space.
Aluminum over a solid core. That construction keeps the cover light enough to live with and tough enough for the job, and the semi-gloss black powder coat is made to resist fading and chipping. Struts hold it against the cab when folded to keep the ride quiet, and you can carry up to 300 lb of evenly distributed weight on top.
A sealed perimeter with somewhere for water to go. The EPDM seals hug the bed rails, and the drainage system gives rain and runoff a path that does not run through your cargo area.
Full bed access without removing the cover. The panels fold forward against the cab, so you can drive with the bed open for tall or bulky cargo while the cover stays secured on the truck. Fold it back down and the bed is covered again in seconds.
Hard panels, and a latch that does the work. The rail and clamp system locks each panel automatically when you close it, so locking up never gets skipped.
If you want a hard cover that locks, seals and folds out of the way without a complicated install, the BAK 226309 is built for exactly that. It is assembled in the USA, carries a three-year limited warranty, and ships from Track Ready Products.
Plan on roughly 30 minutes with basic hand tools. The G2 clamps to the rails, so nothing gets drilled or cut and everything you need comes in the kit.
Clean the bed rail caps first so the seals sit on a clean surface, set the cover in place, and tighten the clamps evenly from side to side. Work the cover open and closed once before you load the bed.
After the first week of driving, recheck the clamps and retention hardware for tightness, and check them again now and then. Wash with mild automotive soap and water, keep the cover secured at all points while driving, and clear snow and ice before opening.