The Mishimoto MMRAD-RAM-19 is a direct-fit replacement radiator for the 6.7L Cummins in 2019 to 2024 Ram 2500 and 3500 trucks. The manufacturer positions it as an upgrade for workhorse Cummins-powered Rams. Its fully aluminum, TIG-welded construction is built for towing and hauling loads, and strutted tubes throughout and louvered fins add rigidity and heat rejection. The core is the main reason to upgrade over stock: the manufacturer says fluid capacity increases by 28%, giving the cooling system more thermal buffer on long grades and in tuned, high-load builds. The kit also includes replacement lower bushings and a magnetic drain plug to catch metallic debris, and it carries a Mishimoto Lifetime Warranty.
Fitment is narrow, so confirm your truck before ordering. The radiator will not fit HO models. The core is designed for a 34-inch radiator core, and a vehicle with a 39-inch wide core is not compatible. If you are searching for a 2019 Ram 2500 6.7 Cummins radiator upgrade, a non-HO 34-inch core Cummins aluminum radiator, or a tow-rig diesel cooling upgrade, this is the part those queries point to. Plan the job around the radiator's mounting points and the surrounding shroud and intake components.
No. The manufacturer states that this radiator will not fit HO models.
The manufacturer specifies a 34-inch radiator core. If your truck has a 39-inch wide core, the manufacturer says this radiator is not compatible.
Yes. The manufacturer lists two replacement lower radiator bushings in the package, so old or worn bushings can be swapped out during the install.
The manufacturer provides a PDF install guide for this radiator, and you should review it before starting. I could not retrieve its step list or a rated install difficulty for this part. For the same truck, the manufacturer's transmission cooler guide shows the access sequence: remove the plastic cover on the top front of the engine, then remove the front portion of the intake air duct, then remove the two bolts attaching the radiator to the upper radiator support and tilt the radiator backward for better access. Drain the coolant first, disconnect the hoses, and transfer the lower bushings over before setting the new unit in place.