The Mishimoto Oil Sandwich Plate Adapter is a threaded CNC'd stainless steel adapter used to mount Oil Sandwich Plates. Machined from stainless rather than aluminum, it gives a sandwich-plate setup a durable, corrosion-resistant mounting point. It has M22 x 1.5 threads on both sides and comes with the Mishimoto Lifetime Warranty. Adding an oil sandwich plate with sensor ports is a common way to run oil pressure or temperature gauges without drilling into the block, and this adapter is the piece that makes that setup thread together. Search terms enthusiasts use include M22x1.5 sandwich plate adapter, oil filter sandwich plate stainless, and oil temp and pressure gauge adapter.
Before buying, confirm that your oil filter uses the same thread pitch. The manufacturer specifies a 35 ft-lb torque for the sandwich plate adapter, which matters because the adapter carries full oil system pressure at the filter mount. Owners on user forums note that a sandwich adapter adds height and makes the filter harder to start back onto the threads, so check clearance around the filter before you commit. Because this part is a spacer rather than a plate, you will still need a compatible oil sandwich plate and its center bolt, so plan on buying the plate separately.
The manufacturer notes that you should check the thread pitch on your oil filter to confirm the adapter will work for your application. Both ends of this adapter are M22 x 1.5, so the filter side must match that pitch.
The manufacturer specifies 35 ft-lb for the sandwich plate adapter. Owners on user forums recommend re-checking the center bolt torque at each oil change, since removing the filter can loosen it over time.
The manufacturer rates this adapter as an easy install with two parts included. Owners on user forums suggest attaching any sensors or oil lines to the sandwich plate before mounting it to the engine, then sliding the center bolt through the plate, threading it in, and installing the new filter on top. Lightly oil the rubber gasket on the block side before installation, as you would for a normal filter. Recheck for leaks after the first run, and if you see any, remove the assembly and confirm everything is seated correctly. Verify the filter thread pitch and the filter height clearance before you start, since a taller setup can make the filter harder to fit.